Hello,welcome to Golden Triumph Group Co.,Limited!
E-mail:gtmachinery05@outlook.com Call us: +86-371-86036378
Home > productview
Manual oil press

Manual oil press

Manual oil press is consists of frame ,press part ,driver part and heating part etc. This machine is easy operate just one people is ok ,this machine can press :peanut ,coconut ,olive ,sesame ,walnut oil etc. And the finial oil is clear and health ,suitable so much for family use. 
  • Technical parameter

Manual oil press technical parameter :


Model

GT-001 manual oil press 

Capacity

0.5-1kg/h

Dimensions

270*350*60 mm

Packing size

(L*W*H)

325*255*95 mm

N/G Weight

3/3.5 kg

Machine material

304 stainless steel

  • Details


Manual oil press introduce :

Manual oil press is consists of frame ,press part ,driver part and heating part etc. This machine is easy operate just one people is ok ,this machine can press :peanut ,coconut ,olive ,sesame ,walnut oil etc. And the finial oil is clear and health ,suitable so much for family use. 


Manual oil press use tips:


● Assembly:

Before operation please fix the frame and make sure crank can be turned freely.

Lubricate washer with edible oil and insert on screw shaft from the small end.

Insert screw shaft in press cage .

Screw on press cage cap and screw on terminal adjustment bolt.

Attach crank arm to screw shaft and tighten the bolt.

Fill 80% fuel to the lamp bottle ,pass a 15cm wick through the washer.

Leave 0.5cm of wick outside and put the longer end in the fuel bottle ,place washer at the bottle mouth.

Place the lamp under press cage .Secure the lamp with rubber band.


● Heating :

To guarantee the oil output ,the press cage should be heated for about 7 minutes. When the press cage temperature reaches 50-70 ℃,material can be put inlet for pressing . The lamp remains heating during pressing as well.


Operation :

Make sure no impurities in the material before pressing .

At the beginning of pressing ,oil flowing the terminal adjustment bolt is normal .Loose the terminal adjustment bolt if the discharge cake is too dry and crank turning resistance is too big.

Tighten the terminal adjustment bolt if the discharged cake contains too much oil residual.


Cleaning:

Clean the oil press immediately after operation .Otherwise residual in the machine will get hard and affect next operation. Thoroughly clean the machine before first oil pressing ,although food grade rust -proofing agent is used.


● Safety and warnings:

Material friction and lamp heating cause very hot press cage ,press cage cap and terminal adjust bolt ,keep hands clear of the hot parts .And if you indeed need operate the parts please take reasonable protection the hot parts ,please take reasonable protection steps.


Manual oil press pictures:


  • Advantage


 Small size ,light weight ,easy move,easy operate ,one people is enough,can be use at any place and any time.

 Long using life

 Simple machine structure 

● Machine made of 304 stainless steel ,the finial oil clear and health enough.

Drive by manual ,suitable for the place no electric or electric short 

ABOUT US

Golden Triumph group co.,limited are established in 2008.Located in the center of China--Henan Province. Our company professional in produce and sale screw oil press ,hydraulic oil press ,manual oil press , oil press spare parts ,oil filter ,roaster ,animal feed pellet machine ,small-medium-large scale oil pressing plant and oil refining plant etc. Read More>>

FAQS

During the oil press use ,there will have some problem ,At here we supply the answer to help you solve the problem. Question one: sudden stop shaft blocked Reasons: 1. New machine without running up 2. Cake too thick ,pressure too high Removal: 1. Carefully operating as using manual 2. Note motor sound and the current intensity.Read More >>

CONTACT US

NO.73 ,Weilai Road , Jingshui district , Zhengzhou City ,Henan province

+86-371-86036378

gtmachinery05@outlook.com

annie.cheng30